using a ruggedized construction, type hza_v withstands a 30 g vibration test. as the main countermeasure to vibration, the metal case is inserted into a molded plastic retaining wall that surrounds the part, keeping it f rmly in place. larger diameter leads provide additional mechanical stability of the internal winding and a larger soldering surface keeps the part f rmly a? xed to the pcb. rated for 105c, type hza combines the advantages of aluminum electrolytic and aluminum polymer technology. these hybrid capacitors have the ultra-low esr characteristics of conductive aluminum polymer capacitors packaged in a v-chip, smt case with high capacitance and voltage ratings. highlights - +105 c, up to 10,000 hours load life - low leakage current - very low esr and high ripple current - 260 c ref ow soldering specif cations outline drawing cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 capacitance range 22 to 330 f capacitance tolerance 20% @ 120 hz/+20 c rated voltage 25, 35, 50, 63, 80 vdc leakage current (at 20c) i = .01cv or 3 a max., whichever is greater after 2 minutes i = leakage current in amps c = rated capacitance in f v = rated dc working voltage in volts low temperature characteristics (at 120 hz) z(-25 oc)/z(+20 oc): 2 z(-55 oc)/z(+20 oc): 2.5 ripple current frequency multiplier frequency 120 hz 1000 hz 10,000 hz 100 khz correction factor 0.1 0.3 0.6 1 rohs compliant high vibration type hza_v -55 oc to +105 oc smt hybrid polymer-aluminum electrolytic capacitors mm size code d 0.5 l 0.3 a 0.2 b 0.2 h max. f i (ref.) w 0.2 p (ref.) k 0.2 r 0.2 s 0.2 t 0.2 f 8 10.5 8.3 8.3 10 -1 to +0.15 3.4 1.2 3.1 0.70 0.70 5.3 1.3 g 10 10.5 10.3 10.3 12 -1 to +0.15 3.5 1.2 4.6 0.70 0.70 6.9 1.3 capacitor markings voltage code voltage vdc e 25 v 35 h 50 j 63 k 80 lot, number: year, line, month for f ltering, bypassing and power supply decoupling with long life requirements film
ratings capacitance (uf) voltage rating (vdc) cde part number max. dcl (ua) max. df @120 hz/20c max. e.s.r. @ 100khz/+20c (ohms) max. ripple current @ 100khz/+105c (a rms) d (mm) l (mm) case code qty/ reel 25vdc ( 32 vdc surge ) 220 25 hza227m025f24vt-f 55.0 0.14 0.027 2.3 8 10.5 f 500 330 25 hza337m025g24vt-f 82.5 0.14 0.020 2.5 10 10.5 g 500 35vdc ( 44 vdc surge ) 150 35 hza157m035f24vt-f 52.5 0.12 0.027 2.3 8 10.5 f 500 270 35 hza277m035g24vt-f 94.5 0.12 0.020 2.5 10 10.5 g 500 50vdc ( 63 vdc surge ) 68 50 hza686m050f24vt-f 34.0 0.10 0.030 1.8 8 10.5 f 500 100 50 hza107m050g24vt-f 50.0 0.10 0.028 2.0 10 10.5 g 500 63vdc ( 79 vdc surge ) 33 63 HZA336M063F24VT-F 20.7 0.08 0.040 1.7 8 10.5 f 500 56 63 hza566m063g24vt-f 35.2 0.08 0.030 1.8 10 10.5 g 500 80vdc ( 100 vdc surge ) 22 80 hza226m080f24vt-f 17.6 0.08 0.045 1.55 8 10.5 f 500 33 80 hza336m080g24vt-f 26.4 0.08 0.036 1.70 10 10.5 g 500 hza 227 m 025 f 24vt Cf rohs compliant indicator packaging type capacitance capacitance tolerance voltage code case code code 227 = 220 f m = 20% 025 = 25 vdc see ratings table 24 = tape carrier width (mm) t = tape & reel v = high vibration cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 part numbering system high vibration type hza_v -55 oc to +105 oc smt hybrid polymer-aluminum electrolytic capacitors film
cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 hza 227 m 025 f 24vt Cf rohs compliant indicator packaging type capacitance capacitance tolerance voltage code case code code 227 = 220 f m = 20% 025 = 25 vdc see ratings table 24 = tape carrier width (mm) t = tape & reel v = high vibration test apply the maximum rated voltage for 10,000 hrs at +105 c with full rated ripple current. after the test measure the capacitance, df, dcl and esr at +20 c. also measure the esr at -40 c and 100khz. ?c at 120hz capacitance will be within 30% of the initial measured value df at 120 hz df will be 200% of the initial specifed value dcl after 2 minute charge leakage current will be the initial specifed value esr at 100khz/+20 c esr will be 200% of the initial specifed value max. esr at 100khz/-40 c after load life test case code c : 2.0 ; case code d : 1.4 ; case code x : 0.8 ; case code f : 0.4 ; case code g : 0.3 load life test shelf life test test subject the capacitor to 1000 hrs at +105 c without voltage. after the test, return the capacitor to room temperature for two hours and then apply rated voltage for 30 minutes. the after test measurements for capacitance, df, dcl and esr at +20 c will meet the following. ?c at 120 hz capacitance will be within 30% of the initial measured value df at 120 hz df will be 200% of the initial specifed value dcl after 2 minute charge leakage current will be the initial specifed value esr at 100khz/+20 c esr will be 200% of the initial specifed value moisture resistance test test subject the capacitor to 2000 hrs at +85 c/85%rh with rated voltage. after the test, return the capacitor to room temperature and humidity for two hours. the after test measurements for capacitance, df, dcl and esr at +20 c will meet the following. ?c at 120 hz capacitance will be within 30% of the initial measured value df at 120 hz df will be 200% of the initial specifed value dcl after 2 minute charge leakage current will be the initial specifed value esr at 100khz/+20 c esr will be 200% of the initial specifed value temperature cycle test test subject the capacitor to 1000 cycles of temperature change from -55 c to +105 c using the following sequence and durations. step temperature time at temperature 1 -55 oc 30 minutes 2 +20 oc 3 minutes max 3 +105 oc 30 minutes 4 +20 oc 3 minutes max after the test, return the capacitor to +20c for one to two hours before measurement. the after test measurements for capacitance, df, and dcl at +20 c will meet the following; ?c at 120 hz capacitance will be within 20% of the initial measured value df at 120 hz df will be 200% of the initial specifed value dcl after 2 minute charge leakage current will be the initial specifed value appearance no signifcant change in appearance high vibration type hza_v -55 oc to +105 oc smt hybrid polymer-aluminum electrolytic capacitors test capacitors with the high vibration base will pass a 30 g acceleration test from 5 hz to 2000 hz with a max. amplitude of 5 mm (peak to peak) for 2 hours each in the x,y and z directions for a total of 6 hours. during the last 30 minutes of the test, the measured capacitance shall be stable. after the test the capacitor shall meet the following: ?c at 120 hz capacitance value will be within 5% of the initial value appearance no signifcant change in appearance high vibration test film
cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 reel dimensions case dia. 8 10 w 26 26 t 3 3 mm case size (mm) case code w 0.3 a 0.2 b +0.3/-0.2 c 0.5 f 0.1 p 0.1 t1 t2 0.2 d +0.1/-0 p1 0.1 p2 0.1 w1 0.1 8 x 10.2 f 24 8.7 8.7 12.5 11.5 16 0.4 11 1.5 2 4 1.75 10 x 10.2 g 10.7 10.7 14.5 mm high vibration type hza_v -55 oc to +105 oc smt hybrid polymer-aluminum electrolytic capacitors recommended land dimensions - + c g g h f d e a b case code case dia. a b c d e f g h f 8 2.7 4.0 4.7 1.3 1.0 1.7 1.1 2.5 g 10 3.9 4.4 4.7 1.3 1.2 1.9 1.1 2.5 film
cde cornell dubilier ? 1605 e. rodney french blvd. ? new bedford, ma 02744 ? phone: (508)996-8561 ? fax: (508)996-3830 recommended refow soldering notes: 1. the capacitors in the 8m and 10 mm case dia. can withstand 2 refow processes, if the peak temperature does not exceed 245 c and the time at or abov e 240 c does not exceed 10 seconds. 2. the 2nd refow process should be performed after the capacitors have returned to room temperature. 3. temperature should be measured with a thermal couple placed on the top surface of the capacitor. 4. after refow soldering, the leakage current, d.f., and e.s.r., will meet the initial specifcations, and the capacitance will be within 10% of the initial measured v alue when measured at room conditions. case code case dia. (mm) peak temperature time at or above 250 c time at or above 230 c time at or above 217 c time at or above 200 c number of refow processes f 8 260c 5 seconds 30 seconds 40 seconds 70 seconds 1 g 10 0 50 100 150 200 250 300 120 seconds 160 c peak temperature 200 c 70 sec. 230 c 30 sec . temperature c tme sec high vibration type hza_v -55 oc to +105 oc smt hybrid polymer-aluminum electrolytic capacitors film
notice and disclaimer: all product drawings, descriptions, specifcations, statements, information and data (collectively, the information) in this datasheet or other publication are subject to change. the customer is responsible for checking, confrming and verifying the extent to which the information contained in this datasheet or other publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on the knowledge that the cornell dubilier company providing such statements (cornell dubilier) has of operating conditions that such cornell dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter C and cornell dubilier specifcally and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specifc customer application, use, storage, transportation, or operating environment. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by cornell dubilier with reference to the use of any cornell dubilier products is given gratis (unless otherwise specifed by cornell dubilier), and cornell dubilier assumes no obligation or liability for the advice given or results obtained. although cornell dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. film
|
